Jiangsu Pucheng Metal Products Co.,Ltd.
Welcome to Jiangsu Pucheng Metal Products Co., Ltd.
Add to Cart
ASTM 904L Stainless steel sheet punch 310S Heat resistant steel plate laser cutting manufacturer
| Grade | 201,202,301,304,304L,316L,310,321,409,410,420,430,904l,C-276 | |||
| Standard | JIS,AISI,ASTM,DIN,EN,GB | |||
| Length | 1000-8000mm or customized | |||
| Width | 50-2000mm | |||
| Thickness | 0.3-100mm | |||
| Surface |
2B/BA/NO.1/NO.4/8K/HL | |||
| Application | Building.bridge,hotel,factory,fan etc | |||
| Certificate | ISO9001,SGS,TUV,BV etc | |||
| Grade | 201,202,301,304,304L,316L,310,321,409,410,420,430,904l,C-276 | |||
| Standard | JIS,AISI,ASTM,DIN,EN,GB | |||
| Length | 1000-8000mm or customized | |||
| Width | 50-2000mm | |||
| Thickness | 0.3-100mm | |||
| Surface | 2B/BA/NO.1/NO.4/8K/HL | |||
| Application | Building.bridge,hotel,factory,fan etc | |||
| Certificate | ISO9001,SGS,TUV,BV etc | |||
| Finish | Thickness | Characteristics | Applications |
| 2B | 0.3-6.0mm | Finished by heat treatment | General application |
| BA(Bright annealed) | 0.5-2.0mm | Bright heat treatment | Kitchen utensil |
| NO.1 | 3.0-50.0mm | Finished by hot rolled | Chemical industry |
| NO.4 | 0.4-3.0mm | Ink short brush | Milk & food processing |
| 8K | 0.4-3.0mm | Mirror finish | Lift and hall |
specifications:
Thickness : Cold rolled(0.3mm-6.0mm); Hot rolled:(3.0mm - 130mm)
Width : 1000mm/1219mm/1250mm/1500mm/1800mm/2000mm or as needed
Length : 1000mm/2000mm/2440mm/3000mm/6000mm/12000mm or as needed.
| Steel grade | ASTM | Mechinical Spefication | ||
| Rm Mpa | Y.S.(Mpa) | A5 | ||
| 201 | 201 | ≥520 | ≥275 | ≥40 |
| 1Cr17Ni7 | ≥520 | ≥205 | ≥40 | |
| 301 | 301 | ≥520 | ≥205 | ≥40 |
| 1Cr18Ni9 | ≥520 | ≥205 | ≥40 | |
| 0Cr18Ni9 | ≥520 | ≥205 | ≥40 | |
| 304 | 304 | ≥515 | ≥205 | ≥30 |
| 00Cr19Ni10 | ≥480 | ≥175 | ≥40 | |
| 304L | 304L | ≥485 | ≥170 | ≥30 |
| 309S | 309S | ≥520 | ≥205 | ≥40 |
| 0Cr25Ni20 | ≥520 | ≥205 | ≥40 | |
| 310S | 310S | ≥520 | ≥205 | ≥40 |
| 0Cr17Ni12Mo2 | ≥520 | ≥205 | ≥40 | |
| 316 | 316 | ≥515 | ≥205 | ≥30 |
| 00Cr17Ni14Mo2 | ≥480 | ≥175 | ≥40 | |
| 316L | 316L | ≥485 | ≥170 | ≥30 |
| 316Ti | 316Ti | ≥515 | ≥205 | ≥30 |
| 0Cr19Ni13Mo3 | ≥520 | ≥205 | ≥40 | |
| 00Cr19Ni13Mo3 | ≥480 | ≥177 | ≥40 | |
| 317L | 317L | ≥480 | ≥176 | ≥40 |
| 0Cr18Ni10Ti | ≥520 | ≥205 | ≥40 | |
| 321 | 321 | ≥515 | ≥205 | ≥30 |
| 409L | ≥360 | ≥175 | ≥25 | |
| 410 | 410 | ≥440 | ≥205 | ≥20 |
| 430 | 430 | ≥450 | ≥205 | ≥22 |
| 444 | 444 | ≥480 | ≥310 | ≥30 |
| 410S | ≥420 | ≥290 | ≥33 | |
| 2205/S31803/F51 | 2205 | ≥450 | ≥620 | ≥15 |
| 2507/S32750/F53 | 2507 | ≥550 | ≥800 | ≥25 |
| 630 | ≥520 | ≥785 | ≥18 | |
| 904L/N08904 | ≥490 | ≥216 | ≥35 | |
Regular cleaning and maintenance
Pay attention to prevent the occurrence of the phenomenon of surface scratches
Use soap, weak detergent or warm water to remove surface dust, dirt
In addition to the surface of the binder with alcohol or an organic solvent (benzene)
Use neutral detergent or ammonia solution in addition to surface oil
With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
